Page 5 (data 121 to 150 of 203) | Displayed ini 30 data/page
<< PREV 1 2 3 4 5 6 7 NEXT >>

121	Education	ABS-205
Football Observers^ Perceptions of Women^s Football in Aceh Tuti Sarwita1, Zulheri Is2, Didi Yudha Pranata3, Zikrur Rahmat4, Irfandi5, Munzir6, Septi Hariansyah7, Irwandi8 STKIP Bina Bangsa Getsempenan Banda Aceh Abstract The presence of women^s football in Aceh is against the MPU because according to them women^s football is not in accordance with Islamic law. With this, this study aims to determine how the perceptions of football observers in Aceh on the formation of women^s football teams in Aceh. Respondents in this study were divided based on 4 criteria consisting of, (1) Perspectives of football lovers, (2) According to the point of view of the Football Coach, (3) Viewpoints of Football Players, (4) Perspectives of Sports Managers. Collecting data in this study using a closed questionnaire system with the aim of knowing the perceptions of football observers in Aceh which are divided into 3 things, namely, in terms of facilities and infrastructure, referees, and cultural / cultural aspects. Based on the results of data processing in this study, the data of this study were presented using a Likert scale with the results that answered strongly disagree 4.8%, disagree 8.8%, agree 22.7%, and strongly agree 63.7 to existence. Women^s Football in Aceh. This research can conclude that the perception of football observers on women^s soccer in Aceh is positive. Keywords: football perception, women Share Link | Plain Format | Corresponding Author (Irfandi Irfandi)

122	Education	ABS-206
Integrating AREL into EFL Speaking in Fostering Critical Thinking Sri Wahyuni1, Mulyadi Syahputra1.2, Defi Irmayanti1, Rosdiana1, Mulyani1, Salwa Chaira1 STKIP Bina Bangsa Getsempena Banda Aceh - Indonesia Abstract The purpose of this study is to integrate AREL into EFL Speaking in fostering critical thinking. The sample of this study was the class XI 1A students of SMAN 4 Banda Aceh which is consisted of 26 students. This study was pre-experimental design with one group pre-test post-test. The instruments of this research is a test (pre-test and post-test). The finding of this study revealed 59,79 for the mean score of pre-test and 62,84 for the post-test, and the standard deviation for pre-test was 7,57 and post-test was 7,77, then the standard error of measurement for pre-test was 1,48 and 1,52 for post-test. Meanwhile, the result of this study indicate that t-test was 6,84 and t-table was 1,71. It represented that t-score is higher than t-table (6,84>1,71) which means that alternative hypothesis (Ha) was accepted and null hypothesis (Ho) was rejected. Thus, integrating AREL into EFL Speaking in fostering critical thinking can enhances students^ speaking ability and students got a positive impact after learning AREL in speaking class. Keywords: Integrating AREL, EFL Speaking Share Link | Plain Format | Corresponding Author (Irfandi Irfandi)

123	Education	ABS-207
Syntax in language production: The utterances of tamiang language In aceh province Rosdiana1, Sariakin2, Hijjatul Qamariah1, Mulyadi Syahputra1, Sri Wahyuni1, Rizka Marlisa Aini1, Maulizan1, Mulyani1 STKIP Bina Bangsa Getsempena Banda Aceh Abstract Syntax is the cognitive capacity of human beings that allows us to connect linguistic meaning with linguistic form. Syntax is the study of rules for combining words into a sentence. Syntax is also has a close relationship to other branches of linguistics such as morphology nd phonology. The purpose of this research is to find out how the syntax of Tamiang language especially the sentences that are construction in the Language such as the patterns of phrases, clauses, and sentences. The research design used in this research was descriptive research. The data in this research were collected through interviewing, noting and translating, recording and transcribing all utterances of Tamiang language. The number of subjects were about 24 persons. The result of the research shows that there are four kinds of phrases in Tamiang language. Meanwhile, Tamiang clauses have two forms: complete and incomplete form. The complete form has two patterns: subject-predicate and predicate -subject. Based on the parts of speech, Tamiang clauses have five forms: nominal clause, verbal clause, adjectival clause, numeral clause and prepositional clause. Tamiang sentences are classified into four kinds: declarative sentence, imperative sentence, interrogative sentence and exclamatory sentence. According to the forms, Tamiang sentences are also classified into four forms: simple sentence, compound sentence, complex sentence and compound-complex sentence. Keywords: Syntax, language production Share Link | Plain Format | Corresponding Author (Irfandi Irfandi)

124	Education	ABS-208
The society famous sport: the analyzing study of sport for Banda Aceh community in new normal era D Y Pranata1,2, Z Rahmat1, M Munzir1, T Sarwita1, I Irfandi1,I Irwandi1, and M Mukhlisuddin1 Physical Education Department, STKIP Bina Bangsa Getsempena, Tanggul Krueng Aceh Baru Street 34, Darussalam, Banda Aceh, Indonesia Abstract The purpose of this study is to determine the favorite sport of the people of Banda Aceh City in the new normal era. descriptive research method with survey techniques. The sampling technique used random sampling techniques, the object was 350 people. Data collection techniques using google form. The data analysis technique used descriptive statistics. The results of the study were sports carried out by the people of Banda Aceh in the new normal era, including jogging by 58.3%, cycling by 27.8%, martial arts 4.3%, badminton sports 4.3% and agility sports 1.9%. Based on the results of the study it can be concluded that the favorite sport of the people of Banda Aceh in the new normal era is jogging. Keywords: favorite sport, new era Share Link | Plain Format | Corresponding Author (Irfandi Irfandi)

125	Education	ABS-209
Exploring the EFL Students^ Perceptions towards the Use of YouTube video media in learning English Pronunciation: Positive or Negative? Mulyani12., Salwa Chaira1., Sri Wahyuni1., Rosdiana1., Maulizan1., Mulyadi Syahputra1., Riska Marlisa Aini1 STKIP BINA BANGSA GETSEMPENA, Aceh, Indonesia Abstract In this digital era, the use of YouTube video media in education sector becomes a need. Learning by using this media supplies a beneficial effect towards either the teacher or students. Researches related to using media in learning English language from year to year show the steady increase in an attempt to boost the students^ outcomes in English language skills. Yet, there has been found rarely the study exploring the EFL students^ perspectives on using the media in English learning. Therefore, it is critical to establish a study focusing on the EFL students^ perceptions towards the use of media particularly YouTube video media in learning English pronunciation. This study aims at exploring the EFL students^ perceptions towards the use of YouTube video media in learning English pronunciation whether positive or negative. This study employs a qualitative approach using questionnaire and observation sheet to 28 students of SMP 2 Mesjid Raya, Aceh. Therefore, based on the results of the questionnaire, it can be stated that the majority of students responded very positively to the use of YouTube-based video media. This is indicated by the high percentage of all statements on the aspects of students^ interest in the use of the media in learning pronunciation. There is a positive significant result shown by the EFL students towards the use of YouTube video media in learning English pronunciation. Keywords: EFL Students^ Perceptions, YouTube Video Share Link | Plain Format | Corresponding Author (Mulyani Mulyani)

126	Education	ABS-210
Critical Analysis: Logical Fallacies in Students^ Debate Regarding Gender Issues Mulyadi Syahputra1., Sri Wahyuni1.2., Rosdiana1., Mulyani1., Riska Marlisa Aini1., Hijjatul Qamariah1, Sariakin1 STKIP Bina Bangsa Getsempena, Banda Aceh, Indonesia Abstract Communication without logical fallacies is highly needed in the 21st century^s student^s skills. Many experts agreed that debate is an effective method to build students^ communication skills. The debate has now expanded from an ELT teaching method into a competitive platform to proliferate students^ critical thinking and communication. However, NUDC is one of the national scales of debate tournament that could represent the Indonesian students^ critical and communication skills. Considering that background in mind, this study was expected to identify the logical fallacies uttered by university students^ debate regarding gender issues. This study deployed a descriptive qualitative design. With a natural setting, the data were collected using the structured observation sheet in three phases, the debate observation without setting manipulation, the recorded debate was scripted and condensate, and analyzing the logical fallacies through the transcription. While the data analysis was conducted through data reduction, data condensation, and data conclusions. The data shows that there are seven logical fallacies uttered by the speakers in the debate about the gender issue. They are misleading euphemism, prejudicial language, an appeal to fear, an appeal to pity, straw man, hasty generalization, and a slippery slope. Besides, the speakers who uttered the logical fallacies were also presented. Keywords: critical analysis, gender Share Link | Plain Format | Corresponding Author (Mulyani Mulyani)

127	Education	ABS-211
The teachers and parents readiness in implementing the learning based on BDR for early childhood education during the Covid-19 in Banda Aceh Fitriah Hayati ,Fitriani, Ayi Teiri Nurtaini, Cut Fazlil Hanum, Salmiati, yenni Mutiawati, Riza Oktariana,Dewi Yuni Sari , Department of Early Childhood Education, STKIP Bina Bangsa Getsempena, Darussalam, Banda Aceh, Indonesia Abstract This research was conducted to see to what extent the success of online program and BDR to early childhood. This research employed a descriptive qualitative method. The result revealed that teachers and parents are not completely able to accommodate the needs and the development of children, because not all of the developments specs could be tested through the assignment but also required routine habituation and a supportive environment. The parents also stated the dificulties in controlling the online learning, due several things such as the level of understanding in early childhood program, sometimes parents also need to control some online classes at the same time also because of parents^ busyness with another job including those parents who work outside of home. Three of six parents stated that difficulties in doing the activities based on the school curriculum demands, this is because the parents have different educational background with the teachers who already have enough competency in early childhood program. The parents usually will follow the teachers^ directions and even the children also not involved because of parents^ busyness and want to finish the assignment that given by the teacher to the children and sent back to the teacher based on the deadline that has been set. Based on the result of research towards the teachers stated that they have difficulty in applying learning from home system (BDR). In terms of parents, they also experience the same thing. Low the understanding of the children development make parents are difficult to do the activities that could stimulate all aspects of child development like the teachers did at school. Keywords: early shilhood, learning at home Share Link | Plain Format | Corresponding Author (Mulyani Mulyani)

128	Education	ABS-212
TAREK PUKAT DANCE ACEH: THE FORM OF EXPRESSION OF ACEH COASTAL AREA SOCIETY LIFE Fitriani, Fitriah Hayati, Ayi Teiri Nurtaini, yenni Mutiawati, Riza Oktariana, Salmiati, Cut Fazlil Hanum Dapertement of Early Childhood Education, STKIP Bina Bangsa Getsempena, Tanggul Krueng Aceh Baru Street 34, Darussalam, Banda Aceh, Indonesia Abstract Tarek pukat dance was created by Yuslizar in 1958. At the beginning, this dance is created to enliven the spirit of Aceh society in the Aceh youth congress that must be proud of Aceh^s land fertility. Tarek pukat dance is inherited through a learning process in Cut Nyak Dhien dance studio. This dance tells about how Aceh society life in the coastal area. Tarek pukat dance is usually performed by 5-9 female dancers, and 4 or 5 male dancers. Based on the information above, the purpose of this research was to observe the expression of Aceh coastal area society as a learning medium of Tarek Pukat dance. The method used in this research was qualitative. The research was located in Cut Nyak Dhien dance studio in Banda Aceh Anjong Mon Mata, in Banda Aceh Regency area. The data collection technique used was observation, interview, and document study. The data validity technique was source triangulation. The data analysis technique used was analysis descriptive. The results that Tarek Pukat dance through movements and properties, such as, peuget pukat, tarek pukat,kayoeh,ikat taloe,pasoe engkot lam raga, puwoe engkot as the expression of Aceh coastal area society. Based on the above matters, it can be said that Tarek Pukat dance builds a cooperative social character, optimistic, consistence, and loyality. Keywords: Tarek pukat dance, Aceh, society life Share Link | Plain Format | Corresponding Author (Mulyani Mulyani)

129	Education	ABS-214
Exploring Students^ Motivation in Submitting Digital Story Telling Tasks on YouTube Berita Mambarasi Nehe 1*, Nur Azmi Rohimajaya2, Welliam Hamer3, Dini Fitriani4, Ledy Nur Lely5 1*English Education, STKIP Setia Budhi Rangkasbitung, 2English Education, Universitas Mathla^ul Anwar, 3English Education, Universitas Sultan Ageng Tirtayasa 4English Education, STKIP Kusuma Negara Jakarta, 5English Education, Universitas Sultan Ageng Tirtayasa Abstract Providing students with some tasks aim at motivating students to engage in a range of digital story telling activities on YouTube. The tasks are designed to explore and practice the skills in completing the tasks given at Speaking 3 subject. The tasks are about digital story telling which means that the story telling was created through media that was YouTube as tool for submitting the tasks. The stories were built in or taken from internet with some titles were Cinderella, Malin Kundang, and Rapunzel, the choice of the titles based on students proposal when discussing together. The subjects were 23 students of English Department of STKIP Setia Budhi Rangkasbitung who took Speaking subject. The Result were all students succeed in creating the content on YouTube about story telling. Each of story has its own value or message that could be adopted to students life. The Finding of the research were students have good motivation in completing the digital story telling in term of intrinsic and extrinsic motivation such as challenging, curious, responsible, good grade, satisfy, parents, friends, environment and it was founded on interview session. As a lecturer, if we want to give good motivation to students in learning, we must find out the appropriate tasks for students in order they complete the task with their best. Keywords: Motivation, Digital Story Telling, Tasks, YouTube Share Link | Plain Format | Corresponding Author (Berita Mambarasi Nehe)

130	Education	ABS-223
Development of kite number learning media help adobe flash cs6 on the concept of place number values in elementary school 2 Singaparna Siti Komariah Nurlela1*, A S Pratiwi1 , Rahmat Permana1 , M F Nugraha1 , B Hendrawan1 , Mujiarto2 , and Milah Nurkamilah1 1 Faculty of Teacher Training and Education, Universitas Muhammadiyah Tasikmalaya, Jl. Tamansari Km 2,5 City of Tasikmalaya, West Java 46196, Indonesia 2 Faculty of Engineering, Universitas Muhammadiyah Tasikmalaya, Jl. Tamansari Km, 2,5 City of Tasikmalaya, West Java 46196, Indonesia Abstract Mathematics learning in class II Elementary School 2 Singaparna there are detention in learning material concept of place number values. Detention is when the teacher teaches the value of the concept of place numbers, students do not understand the material so that the teacher must explain repeatedly to students who have learning difficulties. The average value of students from 32 people is reaching 75,75, and teacher experience detention and limitations in making learning media truly suitable and in accordance with the material to be taught. This time teacher in teaching the material only use learning media by using objects in the environment. There is an active student response in learning, some are still not active because they do not understand even when learning using media. The problem if not resolved as soon as possible will have an impact on student learning achievement and hamper the subsequent learning material as in addition and subtraction operation material. By developing learning media that are interesting for students, can make students become more active, and fun in learning. Kite number learning media can also help students to more easily understand the material concepts of place number values. This study aims to develop and test effectiveness kite number learning media help adobe flash cs6 on the concept of place number values in Elementary School 2 Singaparna. The research method used is the development method with research design development or R&D (Research and Development). This research was carried out in Elementary School 2 Singaparna Sub-District Singaparna Districts Tasikmalaya in class II students as many as 32 people. The data analysis technique used in this study is qualitative and quantitative data analysis techniques. Data collection techniques in this study used questionnaire and pretest-posttest. Quantitative data analysis techniques use descriptive statistics. Development results kite number learning media help Keywords: Media, Adobe flash, kite number Share Link | Plain Format | Corresponding Author (Mujiarto Mujiarto)

131	Education	ABS-228
Digital Video Based Rampak Kendang Learning Media for Deaf Students AS Pratiwi1*, AT Lestari1 , B Hendrawan1 , MF Nugraha1 , M. Nurfitriani1 , M Nurkamilah1, Mujiarto 1 , Tadkiroatun Musfiroh2 , F Nugraha1 , Wan Ridwan H1 1 Universitas Muhammadiyah Tasikmalaya, Indonesia 2 Universitas Negeri Yogyakarta, Indonesia Abstract This study aims to develop an effective digital video-based learning media for rampak kendang learning in Special Schools (SLB). This digital video learning media developed contains the learning process of Rampak Kendang using sign language. This learning media is validated by experts and tested in the field. This research is R & D research through the stages of needs analysis, digital video media design, product validation, field trials, and testing of media effectiveness. The procedure of research development and digital video media development for learning rampak kendang through several stages. The first stage is needs analysis in the form of observations, interviews, and questionnaires. The second is making video designs, making storyboards, making flowchart views, and collecting materials. The third is product validation that consist of media experts validation, material experts, and users. In media expert validation, it got a score of 38 with good criteria on the aspect of appearance, while in the programming aspect got a score of 32 with sufficient criteria. Validation of material experts and users (teachers), consist of the format aspect that got a score of 24, the content aspect of the score 23, the language aspect score of 37, and it got a score 55 for learning aspect, all aspects were in good criteria Keywords: Digital video, learning media, deaf student Share Link | Plain Format | Corresponding Author (AS Pratiwi)

132	Engineering and Technology	ABS-1
A Numerical Study of Savonius Water Turbine Performance Disturbed by Circular Cylinder in Front of Turbine Priyo Agus Setiawan, Triyogi Yuwono, and Wawan Aries Widodo Politeknik Perkapalan Negeri Surabaya Abstract The analysis of the Savonius turbine by using cylinder as passive control has been done. This paper will investigate the effects of the turbine diameter variations in front of turbine center by means of the CFD approach. This study use cylinder as disturbance to improve the turbine performance by placing the circular cylinder in front of turbine center or stagger angle 0 degree. The performance show that a circular cylinder decrease the turbine performance and the performance will decrease by increase the cylinder diameter. Keywords: Savonius turbine, cylinder, CFD, turbine center, performance Share Link | Plain Format | Corresponding Author (Priyo Agus Setiawan)

133	Engineering and Technology	ABS-3
OPTIMIZATION MODEL TO DETERMINE THE LEVEL OF OPTIMUM PRODUCTION FOR MULTIPLE PRODUCTS OF SHORT-AGE OR PERISHABLE PRODUCTS CATAGORY Dadang Arifin, Zaenal Muttaqien Universitas Jenderal Achmad Yani Abstract This paper contains an optimization model to determine the optimum level of production for short-lived products or perishable products. In 2019 the author has developed an optimization model to determine the optimum production rate for single products for products with the short life or perishable products category. In this paper, the authors develop the model for multiple products or multi-product (multi-item). The variable costs considered in this model are the same as the single item model, namely, production costs, set-up costs, storage costs and expired costs. The model developed departs from a production system that adopts a batch production system. In this multi-item model, all products use the same facilities so that production activities for each item are carried out alternately by following a certain batch size. The optimization model developed is to determine the batch size of each item in each production cycle so as to minimize total costs, minimize scarcity and reduce buildup which results in expired products. The constraints considered are capacity, demand, and life time (product service life). Model validation is done mathematically and empirically. Mathematically it is done using derivatives, while empirically uses examples of real cases in the field. The author hopes that this model will provide practical benefits for practitioners and academics, especially students. Keywords: optimal, deficiency, overstock, expiration, cost. Share Link | Plain Format | Corresponding Author (Dadang Arifin)

134	Engineering and Technology	ABS-7
Prototype Virtual Reality for Simulation Installation of Electricity Transmission Muhammad Fadli Prathama (*), Andi Dahroni (**), Pritasari Palupiningsih (***), Rakhmadi Irfansyah Putra (****), Muhammad Fajri Hidayatullah (*****) Institut Teknologi PLN Abstract Increasing the use of electricity every year always occurs, as well as an increase in the construction of substations and distribution substations as a means of PLN electricity transmission. The process of maintaining and installing substations and distribution substations certainly has a very high risk that can sometimes be deadly. The workers who are going to perform maintenance and installation of the electricity network require qualifications to work at a place that is at a height. These qualifications make Electrical Engineering students have a lesson about the installation of electricity networks where they will try to climb the electricity poles to do the electrical network installation. For that we need an application that can use virtual reality technology so that students and students can learn the process of installing the electricity network more safely, before they go straight into the field. This application was created using Unity 2019 software, which can produce mobile-based programs both in the android operating system. This research will use 360 video which will illustrate how the process of climbing to the top of the electricity pole and the process of installing the electricity network. This study aims to build a simulation application of electrical network installation using virtual reality technology, which is expected to provide an overview and simulation for Electrical Engineering students so that the learning process is safer and more controlled. Keywords: virtual reality, semi immersion, simulation Share Link | Plain Format | Corresponding Author (Muhammad Fadli Prathama)

135	Engineering and Technology	ABS-8
INTERNET OF THINGS HOUSEHOLD ELECTRONIC DEVICES CONTROL Rakhmadi Irfansyah Putra, Andi Dahroni, Muhammad Fadli Prathama, Eka Putra Institut Teknologi PLN Abstract The need for electrical energy continues to increase every year, according to data on sales of electricity from PLN issued by the Minister of Energy and Mineral Resources, showing that the total number of customers in 2016 reached 64,282,493 customers. Compared to 2015 this figure increased by 3,114,513 subscribers or 4.84%. Of the total number of customers, the household group was the largest number, namely 59,243,672 customers or 92.16%. From these data, the household sector plays a big role in the use of electricity supply in Indonesia. A large number of community activities every day causes them to be negligent or not really paying attention to how the electricity is used, for example by accidentally not turning off the lights, television, and AC when going out. The Internet of Things (IoT) is an innovative paradigm that makes the earth in a modern wireless telecommunications setting fast. The basic impression of this concept is the expansion of the Internet into the real world by taking in everyday objects Therefore, the researchers tried to make a tool as well as mobile-based software to control household electronic equipment used daily at home with smart electrical terminals or named TICO (Electronic Control). The output target of this research is a national scientific journal publication that is not accredited. Keywords: internet of things, save electricity, smarthome Share Link | Plain Format | Corresponding Author (Rakhmadi Irfansyah Putra)

136	Engineering and Technology	ABS-9
ANDROID BASED SERVICE AND MANAGEMENT INFORMATION SYSTEM ^DESA CITIMUN^ Andi Dahroni, Muhammad Fadli Prathama, Rakhmadi Irfansyah Putra, Pritasari Palupiningsih Institut Teknologi PLN Abstract The quality of a regional and central government needs to be supported by managed data and information. Good data processing means that the data must be structured, systematic, and integrated so that the information that arrives is accurate, fast, accurate, and relevant information. Apart from general information, personnel information related to other systems is also an important factor in supporting the quality of good governance. The need for a Village Service and Management information system in processing village information is very much needed at this time where services are still very conventional so to get information about the village the community/population must come directly to the village office so that sometimes they get information that is not updated With the launch of Citimun Village to be one of the digital villages in 2019 by the Subang district government, it is hoped that the community can get information and fast service using technology in the 4.0 era. The research method used to solve various problems that occur is FAST (Framework for the Application of System Thinking). Keywords: Information system, Service, FAST Share Link | Plain Format | Corresponding Author (Andi Dahroni)

137	Engineering and Technology	ABS-10
Implementation of MDLC Method in Development of Game Based Animation for Elementary School Science Subject Eka Putra, Andi Dahroni, Budi Prayitno, Pritasari Palupiningsih Institut Teknologi PLN Abstract The needs of the world of education that follow the development of technology make many parties able to follow these developments. It is not a taboo anymore that technology becomes a benchmark for the advancement of an educational institution. There are still many educators who do not keep up with technological developments so that the results of education are not optimal. E-Learning Becomes A Latest Innovation To Cover These Disadvantages, The Design Of A Multimedia-based E-Learning Is Considered To Be One Way To Be Able To Learn And Implement Technology. Supported By Using The Multimedia Development Life Cycle Method Will Make This Research More Systematic And Structured, Where This Method Has 6 Stages, Namely Concept, Design, Material Collecting, Assembly, Testing And Distribution. In this study, the research team collected data from science subjects in grade 1 elementary school. So later the teacher will not only teach conventionally as usual, but can also apply the use of multimedia technology as support and learning attraction for each student. So that later graduates or students from each educational institution will become literate about technological developments as a whole. Keywords: Multimedia, Multimedia development life cycle, Education, E-Learning, Science Share Link | Plain Format | Corresponding Author (Eka Putra)

138	Engineering and Technology	ABS-19
Converter of Indonesian Sign Language into Text and Voice, Text and Voice to Sign Language to build communication between Inclusion Vocational School students and teachers Andriana, Zulkarnain, Olly Vertus, Sutisna Abdul Rahman, Ida Hamidah, Iwan Setiawan, Mokhammad Syaom Barliana, Tutin Aryanti, Dedi Rohendi, Lala Septem Riza Universitas Langlang Buana - Bandung Indonesia Universitas Pendidikan Indonesia - Bandung Indonesia Abstract The main objective of this research is to build a sign recognition model that allows processing and classification of the greeting language for Indonesian Sign Language communication and to develop it by designing Machine learning to train the recognition model from input sign language to voice and text or vice versa from voice and text to sign language with the help of the OPT8320 type time of flight camera sensor and infrared sensor. To achieve this goal, benchmark efforts are carried out using machine learning methods and algorithms on video processing techniques based on position, rotation of coordinates and finger conditions for conversion from sign language to text and voice and computational intelligence engineering methods to convert speech and text into sign language. The results of this study become digital learning media that can help communication between inclusive students and teachers in schools. In this research, 5 greeting words were tested in Indonesian. Success with a trial of 5 greetings. Keywords: Machine learning, Inclusion , Time of Flight Camera, Indonesian language, infrared sensors Share Link | Plain Format | Corresponding Author (Andriana Andriana)

139	Engineering and Technology	ABS-21
MACHINE DESIGN TO REDUCE THE SAP ON THE COFFEE BEANS Rina Indrayani, Dewi Mulyasari Sumarta, Agus Rahmat Hermawanto, Moh.Rizal Ngambah Sagara Sekolah Tinggi Teknologi Bandung Abstract Coffee is an important type of drink for some people around the world, because has a distinctive taste, a plantatio product that plays an important role in economic activity in Indonesia. Coffee is alsi one of Indonesia^s export commodities which is quite important as s source of foreign exchange in addition to oil and gas. In addition to more open export opportunities, the domestic coffee maket is still quite large, so that coffee is in great demand by the majority of people around the world. This study aims to make a design to reduce the sap content of coffee beans after stripping, so that the sun drying process does not require a long time. It is hoped that this machine can really work in accordance with the hopes and desires of the farmers, as well as to increase higher prices, which include analyzing problems, conceptualizing design, making function block schemes, calculating loads, selecting materials, until getting a working drawing. The design method used in the sap content reduction machine and the method is called the French design method. This tool is a machine with dimensions of length, width and height, respectively 1120 x 395 x 445 mm. Keywords: Machine Design, Coffee bean, Sap Share Link | Plain Format | Corresponding Author (Rina Indrayani)

140	Engineering and Technology	ABS-22
THE WATER QUALITY STATUS AND TROPHIC STATUS OF TOBA LAKE ARE NOT APPROPRIATE TO THE DEVELOPMENT OF NATIONAL TOURISM MOREOVER INTERNATIONAL TOURISM, THE IMPLEMENTATION OF THE GERMADAN TOBA AS A POLICY OF ZONE PLANNING Anggiat Sinurat(a*), Muhammad Yusrizal Adi Syaputra (b), Robert Tua Siregar (c), Risma Nuraini Munthe (a), Bilson Panjaitan (a) a. Universitas Simalungun, Jalan Sisingamangaraja Barat, Pematangsiantar, Indonesia *angginoer[at]gmail.com b. Universitas Medan Area, Jalan Kolam Nomor 1 Medan Estate, Medan c. STIE Sultan Agung, Jalan Surabaya Nomor 19, Pematangsiantar Abstract This article is the result of development for the implementation of the Study on Development and Management Methods for Lake Toba Water Quality, which was funded by the Environment Agency of North Sumatra Province, in 2019. Analyzing the implementation of Regional Planning policies in the development and management of sustainable Lake Toba water quality needs to be done. GERMADAN Toba is very important in the management of lake water quality, as a planning document, this movement has been carried out for 5 years by integrating programs and activities by the Government of the Republic of Indonesia, Provinces, Regencies and Villages, so that activities do not overlap between government agencies. With the qualitative descriptive analysis method and critical analysis of water quality and the implementation of the GERMADAN Toba program, it is known that there are still many dominant sources of water pollution and GERMADAN Toba^s performance is not yet effective in controlling water quality. This study recommends an important concept in controlling the water quality of Lake Toba which is predicted to be effective in the future in strengthening the Lake Toba area as a national strategic area in the tourism sector. Keywords: Toba Lake, Water Quality, Trophic Status, GERMADAN Toba, National Strategic Tourism Area, Zone Planning Share Link | Plain Format | Corresponding Author (Anggiat Sinurat)

141	Engineering and Technology	ABS-24
Drying Agricultural Waste Briquettes Using Microwave Method Kuntang Winangun1, M. Malyadi2, Fauzan Masykur3 1)2) Program Studi Teknik Mesin, Fakultas Teknik, Universitas Muhammadiyah Ponorogo 3) Program Studi Teknik Informatika, Fakultas Teknik, Universitas Muhammadiyah Ponorogo Abstract The drying method of agricultural waste briquettes using microwave heating is considered faster and can be measured. Biomass briquettes are an alternative to fossil energy. Biomass briquette material has a large capacity and is easily available in the surrounding environment. The purpose of this study was to determine the value of water content, value of ash content, flame duration, temperature and calorific value of briquettes made from coconut shell, soybean skin, peanut shell, corncob, rice straw, and cassava shell. From the results of the research data, it can be seen that the lowest water content is in the coconut shell, the lowest ash content is in the coconut shell, the duration of ignition and the highest temperature is briquette on the peanut shell, the highest calorific value is in the coconut shell. Overall, the test of agricultural waste material that has the highest value is coconut shell. Keywords: microwave, agricultural waste, drying briquettes Share Link | Plain Format | Corresponding Author (Kuntang Winangun)

142	Engineering and Technology	ABS-29
Effect of Visual Communication on Crowdfunding Success Yanti Pasmawati (a,b*), Alva Edy Tontowi (a), Budi Hartono (a), Titis Wijayanto (a) a)Departement of Mechanical and Industrial Engineering, Universitas Gadjah Mada, Yogyakarta, Indonesia Jalan Grafika No.2, Yogyakarta 55284, Indonesia *yanti.pasmawati[at]mail.ugm.ac.id b)Departement of Industrial Engineering, Universitas Bina Darma, Palembang, Indonesia Jalan Jendral A Yani No.3, Palembang, Sumatera Selatan 30111, Indonesia Abstract Success rate of the technology category on the crowdfunding campaign is quite low. Customer investment is really needed for the success of crowdfunding a startup product. The success and failure of crowdfunding campaign is determined by the achievement of funding targets. Visual communication is used as campaign information to stimulus backers to fundrising. However, there are variations in the use of visual communication for each campaign. The aims of study is determine the impact of visual communication as information on crowdfunding success. This study uses online observation method on reward-based crowdfunding platform, namely a kickstarter. The amount of visual communication in each campaign was collected. Naive Bayes was used to classification of similarity of an object. Results show that visual communication has an accuracy of more than 70%. This accuracy value show that visual communication have a positive impact on crowdfunding success. Keywords: Visual Communication- Crowdfunding- Success Prediction- Naive Bayes Share Link | Plain Format | Corresponding Author (Yanti Pasmawati)

143	Engineering and Technology	ABS-30
Result Oriented Program Design on the BSC Model Using the Master Improvement Model, PT X study case in the Property Sector M A Pahmi, Wilarso, Sawarnih Hasibuan, Ikhsan Romli Sekolah Tinggi Teknologi Muhammadiyah Cileungsi. Universitas Mercu Buana-Jakarta Universitas Pelita Bangsa-Indonesia Abstract As a form of control and evaluation of strategic management, the BSC (Balanced Score Card) model is commonly used to create a matrix of the relationship between strategy and targets to be achieved by an organization. The matrix is &#8203-&#8203-generated through the intermediary BSC model, but in the absence of any references regarding the concept of implementing a comprehensive BSC, this makes industry practitioners having difficulty translating the matrix and model into result-oriented programs. The purpose of this research is to make the key result-oriented program elaboration of the BSC model using the master improvement model method. The method used in this study uses the BSC model which describes 4 perspectives and the master improvement model as a result-oriented translation of the program. The findings of this study indicate that of the two corporate strategies described by the BSC model, 9 result-oriented programs must be implemented. and the translation of the BSC Model can be easily done with a master improvement model, which aligns aspects of the vision, long-term and annual targets and, how to measure it, target-oriented and key result-oriented programs Keywords: Oriented Program, BSC, Key Master Improvement Models Share Link | Plain Format | Corresponding Author (Wilarso Arso)

144	Engineering and Technology	ABS-31
Vacuum Tank Analysis With Minus Pressure 125 Kpa, Comparison Between Bending Moment Stress And FEM Stress Asep Dharmanto, Wilarso Sekolah Tinggi Teknologi Muhammadiyah Cileungsi Abstract The main structural tank construction designed with 3D solid modeling. To determine the stress and deflection of wall tank transformer, vacuum analysis has to be done. The minus pressure of 125 kPA to be applied to all internal surface of tank. Calculation based on sectional wall has to be done with MS excel and the analysis used Finite Element Method (FEM) by software Cosmosworks from Solidworks Corp. In view of those calculations we can take the summary about strength of tank transformer from vacuum loading. Type of material analysis is ST37 as common steel construction, with Ultimate Tensile Stress (UTS) 370 MPa , Yield Stress (YS) 240 MPa and factor of safety Allowable Stress (AS) 180 MPa. The value stress below 168 MPa means still under elastic linier stiffness of material or in other words any wall deflection happens because of pressure will be back to state before pressure Keywords: 3D, Solid Modeling, Finite Element Method, Ultimate Tensile Stress Share Link | Plain Format | Corresponding Author (Wilarso Arso)

145	Engineering and Technology	ABS-37
Improving Water Management for Sustainable Residential Design (Case Study : Kawasan Cimahi Utara, Indonesia) Tika Novis Putri, Nova Asriana, and Yoska Farhabi Langlang buana University Abstract In recent years, Indonesia commonly gets a flood in the rainy season, especially in South Cimahi as a new city in West Java. There are some causes of getting flood in this area, such as the changing of land use in the upstream area, a high intensity of rainfall, a lack of water management system (grey and stormwater management), the infeasible capacity of drainage system, and the clogged drainage from garbage. Meanwhile, in the dry season, around 8 cities in Cimahi have a crisis of water which is caused by several aspects- the land usage does not consider about soil and water conservation so that there is a disturbances of water absorption into soil, the insufficient water supply, and the high water consumption for domestic needs, households, industries, agricultural. Moreover, the highest groundwater usage is from households that causes the declining water absorption due to the new development of residential areas in the land conservation. These issues are affected in the downstream, Citeureup North Cimahi, as a conservation area that will be a case study in this research This research idea is to create a sustainable residence prototype design to improve water management. Therefore this strategy will be another alternative solution to flood risk management in the rainy season. In addition, this self-sufficient house design prototype is capable of conserving groundwater and fulfill the domestic needs in the dry season. Keywords: sustainable residences , water management, water conservation, sustainable design Share Link | Plain Format | Corresponding Author (Tika Novis Putri)

146	Engineering and Technology	ABS-73
Damage Analysis of Diesel Engine Generator Set Indicated Glowing Using Fishbone Analysis Method Wilarso, M Ali Pahmi, Asep Dharmanto, Supriyadi Sekolah Tinggi Teknologi Muhammadiyah Cileungs Universitas Serang Raya Abstract The diesel engine generator set operating at the Jeranjang Power Plan was damaged, before the damage indicated glowing in the exhaust manifold. This research is to identify the damage to the diesel engine generator set unit so that the same damage does not happen again. The research method used the fishbone analysis. From research conducted on diesel engine components that have problems, it was found that several injector components were jammed on the spring, cylinder liner crack, and the actuator jammed. As for the glowing indication, it is caused when the rack actuator jammed is in the open position of the injector and the condition of the injector spring is jammed so that unburned fuel is carried to the exhaust manifold, with the chemical reaction between CO2 + CO causing glowing in the exhaust manifold. In checking the cylinder head component, a crack was found between the exhaust valve hole and the intake valve. From the research using fishbone analysis, the damage to the diesel engine which resulted in a cylinder head crack, jammed injector component was caused by a diesel engine^s lack of radiator water. Keywords: Failure Analysis, Glowing, Cylinder Head Crack, Overheating Share Link | Plain Format | Corresponding Author (Wilarso Arso)

147	Engineering and Technology	ABS-75
Modeling of Flood Vulnerability Level of Pontianak City Iin Arianti1, Muhammad Rafani1* 1Department of Civil Engineering, Politeknik Negeri Pontianak, Indonesia *Corresponding author r4f4n1[at]yahoo.com Abstract This research was conducted to establish a vulnerability model of flood hazard in the city of Pontianak, West Kalimantan Province used GIS. The model was based on scoring and weighting of biophysical factors. The AHP (Analytic Hierarchy Process) method and logical formulations were used to establish the model. The result showed that the accuracy of model by AHP to determine the vulnerability of flood was only 80% in Pontianak City. Therefore the model was not good enough to represent actual condition in the field. The accuracy of model using logical formulations to determine the vulnerability level of flood was 84%, this means that the results of model 1 have a confidence level of 84% after checking the location of inundation points on the map against inundation points in the field. The Kappa accuracy value in model 1 is 79.3%, this means it is able to avoid 79.3% errors. The model of flood vulnerability (model 1) explains that most of Pontianak City has a very high level of flood vulnerability, which is 31,440,568.8 m2 or 29.11% of the total research area of 108,003,319.8 m2. The vulnerable area is 29,945,485.7 m2 or 27.73% and the less secure area is 22,126,936.3 m2 or 20.49% and the safe area is 24,490,328.7 m2 or 22.67% of the total area. Sub-districts that have the most area in a very flood prone area in a row are City Pontianak Sub-district covering 8,299,516.9 m2- then followed by South Pontianak Sub-district covering an area of 6,980,141.8 m2- West Pontianak Sub-district covering an area of 5,638,021.4 m2- North Pontianak Sub-district covering an area of 4,095,410.0 m2- Southeast Pontianak Sub-district covering 3,830,011.8 m2- and the Sub-district of East Pontianak covering 2,597,441.2 m2. Keywords: Model, flood vulnerability, AHP, kappa Share Link | Plain Format | Corresponding Author (Muhammad Rafani)

148	Engineering and Technology	ABS-77
Integrated Modeling of Lot Production Scheduling and Machines Maintenance Scheduling for Multiple Items Processed on Two Series Deteriorating Machines in JIT Environment Zahedi Zahedi(1*), Wikaria Gazali(2), Ramir Santos Austria(3), Haris Haris(4) 1,2: Mathematics Department, School of Computer Science, Bina Nusantara University, Jakarta, Indonesia 11480 3: Department of Mathematics Education, College of Teacher Education, University of the Cordilleras, Baguio City, Philippines 2600 4. Logistic and Transprtation Institute (ITL Trisakti), Kebon Nanas Street, Jakarta 13410, Indonesia. *Correspondent Author Email: zahedizahedi[at]binus.ac.id, wikaria[at]binus.edu, rsaustria[at]uc-bcf.edu.ph, harissemak[at]yahoo.com Abstract This paper develops an integrated modeling of lots production scheduling and machines maintenance scheduling on flow shop with two machines. The manufacturing system produces multiple items to be delivered at a common due date. This model describes a trade-off between lot production cost and machines maintenance cost as number and quantity of lots on the series machines. The objective function of the integrated model is total cost minimization that is consisting of in process inventory lots and completed lots inventory cost, machines setup costs, preventive maintenance cost, corrective maintenance cost and rework cost on two series deteriorating machines. The step wise optimization algorithm developed to solve the mixed integer quadratic programming of the problem model. Comparison with the practice and the model sensitivity analysis are showed to clarify how the algorithm works Keywords: flow shop, multiple items, two machines, lots production, machine maintenance Share Link | Plain Format | Corresponding Author (Zahedi Zahedi)

149	Engineering and Technology	ABS-82
Priority and Weighting of the University Information Technology Division Performance Measurement Indicators Using Analytical Hierarchy Process (AHP) and Analytical Network Process (ANP) Methods Citra Wiguna(a), Wahyu Adi Prabowo(b), Ovel Canserifo F(a) (a) Information System, Telkom Institute of Technology Purwokerto (b) Informatics, Telkom Institute of Technology Purwokerto Abstract The Information Technology Department is a division that must exist in every university. This department is also known as the investment and service center. The philosophy of the IT department is used to improve customer satisfaction in terms of service. It is necessary to measure performance as an evaluation of university performance to improve quality and maintain standards in the IT department. Performance measurement is carried out to encourage universities to manage all their resources, systems, and employees so that work results are in line with the company^s vision, mission, and strategic goals. In preparing performance measurement indicators, a method is needed that acts as a decision making in terms of priority and weighting of each indicator accurately. Analytical Hierarchy Process (AHP) and Analytical Network Process (ANP) methods can find out which indicators will be used for performance measurement. In this study, the results show that the implementation of the AHP and ANP methods is based on Expert Judgment and Decision Tree to obtain indicators that are in line with the business processes of the IT department of the university. As a result, 21 indicators are weighted and rated for priority. Based on these indicators, the highest priority is the indicators of service quality satisfaction index obtained by the AHP with a value of 0.1137, while by the ANP method with a value of 0.11367. The indicator with the lowest priority value is IT Budget Realization with a value of 0.007931 using the ANP method and 0.0082 using the AHP method. This result shows that the implementation of the AHP and ANP methods has the same priority results. The comparison of the two methods results in a better choice of indicators and can be used as a consideration for decision-makers to determine more comprehensive performance measurement indicators. Keywords: Department of IT, Performance measurement, Analytical Hierarchy Process (AHP), Analytical Network Process (ANP) Share Link | Plain Format | Corresponding Author (Citra Wiguna)

150	Engineering and Technology	ABS-88
Design And Development Of Bending Part Band-42 Firmansyah Azharul, Rahmawati, Dian Ariyana, Wilarso Sekolah Tinggi Teknologi Muhammadiyah Cileungsi Abstract The stamping process in making part band 42 is still less efficient and effective in the production process because the bending process still requires four strokes. This causes the production time is long enough so that productivity is not optimal. The purpose of this study was to determine the efficiency and production process of the band part 42. The method used in the design and construction of a bending device which is operated by pneumatic power has a capacity of 1 MPa. This tool is designed and made so that the bending process of the Band 42 section can be done in one step. With the design and production of this tool so that the work process can be more efficient so that work productivity will increase Keywords: Stamping Proscess, Part Band 42, Pneumatic Share Link | Plain Format | Corresponding Author (Wilarso Arso)

Page 5 (data 121 to 150 of 203) | Displayed ini 30 data/page
<< PREV 1 2 3 4 5 6 7 NEXT >>

Powered By Konfrenzi Ultimate 1.832L-Build9 © 2007-2026 All Rights Reserved