First, I say thank you for your question.
In this work, firstly, turn on the electrical installation to flowing the water. Then, we
have to manage the water debit. The load were connected to water debit. I mean
that we are manage the water debit using the loads. Then, the water were flow and
it also manage using a tap. And it was that i said valve guide in my abstract. We
have to manage the valve guide angle to flowing the water.
For the generator, did you mean the specification or what?
Yes. As far as I know, the turbine must be connected to a generator in order to
generate electricity. Would you mind explaining the specifications of the generator
you^re using?
On the other hand, the generator must be connected to an electric load in order to
perform current measurements. Could you please describe the electrical load you
used in the test?
The turbine that we used is made by our team and it only in laboratory scale. The
electrical load used is a lamp with a power of 8 watts arranged in such a way and
measured using a multimeter.
