Numerical study on the influence of pickup tube diameter on the gas-liquid flow inside a swirl separator Ryan Anugrah Putra*, Akhlisa Nadiantya Aji Nugroho
Department of Mechanical & Industrial Engineering, Faculty of Engineering, Universitas Gadjah Mada,
Jalan Grafika No. 2, 55281 Yogyakarta, Indonesia
*Corresponding author: ryan.putra[at]ugm.ac.id
Abstract
Gas-liquid flow can be separated by using a swirl separator. One of the interesting parts to be investigated in the swirl separator is the influence of the pickup tube diameter. Therefore, its influence on the gas-liquid flow behavior inside a vertical pipe equipped with a static swirl separator element is investigated in this study by using computational fluid dynamics (CFD). Euler-Euler approach simulating water as the continuous phase and air as the dispersed phase was selected in this study. The difference in the gas-liquid flow characteristics observed in the simulation using 4 mm, 6 mm and 8 mm diameter of the pickup tube is presented and discussed in this study.
