Video Direct Link | Abstract

Abstract ABS-176

The Design and Analysis of Oil Cooler System on Motorcycle 100 CC of Engine Volume Rinasa Agistya Anugrah, Muhammad Hanif Darminto Corresponding Author: Rinasa Agistya Anugrah

Question from Mr. Drs. Salis Rabindra Ishaya, M.M. 2020.11.18 14:00:50 in your presentation is using Honda Supra it means 4 stroke engine, I want to know your opinion if you apply to the 2 stroke engine like rx king or ninja 125 and is it worthed if we are using oil cooler for 2 stroke engine which is different type of using oil and the route of the oli

Reply from Mr. Rinasa Agistya Anugrah 2020.11.18 14:49:19 I^m sorry I have not applied this system yet to engine with 2-stroke type, but I will try to give an argument that oil cooler system make more circulation of heat transfer from engine to the air, if we use in this engine we still get the same benefit as good as 4 stroke tipe of engine. In the conduct design oil cooler we have to add the contain of oil so as not to run out, according to the volume of added oil needed. Moreover, in the 2-stroke system, oil (side oil) is also used in the combustion process, so it requires additional oil for this. There is a need for study to follow up whether it is worthed if applied to a 2-stroke motorbike. thanks.

Reply from Mr. Drs. Salis Rabindra Ishaya, M.M. 2020.11.18 15:07:31 you can added the thing you made just for engine oil, its useless cause it only using for gear and wet coupling and it not using for combusting its not significant to reduce the heating of the block, head and piston there is using side oil I am talking about 2 stroke engine, as an opinion if you want to make the next research its very good for you to researching this matter thank you very much Mr. Rinasa

Reply from Mr. Rinasa Agistya Anugrah 2020.11.18 15:46:38 Thank you for your suggestion for me Mr. Ishaya.

Powered By Konfrenzi Ultimate 1.832L-Build7 © 2007-2025 All Rights Reserved